2018
192. Bhattacharya S., Alpas A.T., "A Novel Elevated Teperature Pre-Treatment for Electrochemical Capacity Enchancement of Grahene Nonoflake-based Anodes" Materials of Renewable and Sustainable Energy, 7, (3).
https://link.springer.com/article/10.1007/s40243-018-0110-3
191. Bhowmick S., Khan M.Z.U., Banerji A., Likitsch M.J., Alas A.T., "Low Friction and Wear behaviour of Non-hydrogenated DLC (a-C) Sliding Against Fluorinated Tetrahedral Amorphous Carbon (ta-C-F) at elevated Temperatures" Applied Surface Science, 450, (274-283).
https://www.sciencedirect.com/science/article/pii/S0169433218309772
190. Jenab A., Green D.E., Alpas A.T.,"Experimental and Numerical Analyses of Formability Improvemnet of AA5182-O Sheet During Electro-Hraulic Forming" Journal of Materials Processing Technology, 225, (914-926).
https://www.sciencedirect.com/science/article/pii/S0924013617306283
189. Yang Z., Bhowmick S., Sen F.G., Banerji A., Alpas A.T., "Roles of Sliding-induced Defects and Dissociated Water Molecules on Low Friction of Graphene" Scientific Reports , 8, (121).
https://www.nature.com/articles/s41598-017-17971-1
2017
188. Sun G., Bhattacharya S., Alpas A.T., "Cyclic Strain- induced Crack Growth in Graphite During Electrochemical Testing in Propylene Carbonate-based Li-ion Battery Electrolytes" Journal of Material Science, 2(53) (1297-1309).
https://link.springer.com/article/10.1007/s10853-017-1547-y?%20wt_mc=Int...
187. Khan M.Z.U., Bhowmick S., Lukitsch M.J., Alpas A.T., "Effect of Test Atmosphere on the Tribological Behaviour of the Tetrahedral Amorphous Carbon (ta-C) and Fluorinated ta-C (ta-C-F) Coatings against Steel" Surface and Coatings Technology, 332 (382-390).
https://www.sciencedirect.com/science/article/pii/S0257897217309519
186. Sun G., Bhowmick S., Alas A.T., "Effect of Atmoshere and Temperature on Tribological Behaviour of the Ti Containing MoS2 Coatings against Aluminum" Tibology Letters, 65, 4, 158 (1-123).
https://link.springer.com/article/10.1007/s11249-017-0934-5
185. Bhowmick S., Lou., M., Khan M.Z.U., Banerji A., Alpas A.T., "Role of an Oxygen Atmosphere in High Temperature Sliding Behaviiour of W Containing Diamond-like Carbon (W-DLC)" Surface and Coatings Technology, 332, (399-407).
https://www.sciencedirect.com/science/article/pii/S0257897217309374
184. Bhattacharya S., Alpas A.T., " Effects of Electroyte Composition and Voltage Scan Rate on Cyclic Performance of Silicon-Aluminum Anodes for Lithium-Ion Cell" Journal of The Electrochemical Society, 75, (23), 2017, 1-15
http://ecst.ecsdl.org/content/75/23/1.short
183. Banerji A., Lukitsch M.J., McClory B., White D., Alpas A.T., " Effect of Iron Oxides on Sliding Friction of Thermally Sprayed 1010 Steel Coated Cylinder Bores" Wear, 376, 2017, 858-868.
http://www.sciencedirect.com/science/article/pii/S0043164817303411
182. Banerji A., Bhowmick S., Alpas A.T., " Role of Temperature on Tribological Behaviour of Ti Containing MoS2 Coating against Aluminum Alloys", Surface and Coatings Technology, 314, 2017, 2-12.
http://www.sciencedirect.com/science/article/pii/S0257897216309288
181. Jenab A., Green D., Alpas A.T., " Microscopic Investigation of Failure Mechanisms in AA51802-0 Sheets Subjected to Electro-hydrulic Forming" Materials Science & Engineering A, 691, 2017, 31-41.
http://www.sciencedirect.com/science/article/pii/S0921509317302964
180. Tas M.O., Banerji A., Lou M., Lukitsch M.J., Alpas A.T., " Roles of Mirror-like Surface Fininsh and DLC Coatings on Piston Rings on Increasing Scuffing Resistance of Cast Iron Cylinder Liners", Wear, 376- 377, 2017, 1558-1569.
http://www.sciencedirect.com/science/article/pii/S0043164817302594
179. Krishnamurthy G., Bhowmick S., Altenhof W., Alpas A.T., "Increasing Efficiency of Ti-alloy Machining by Cryogenic Collong and using Ethanol in MRF" , CIRP Journal of Manufacturing Science and Technology, 18, 159-172.
http://www.sciencedirect.com/science/article/pii/S1755581717300020
2016
178. Banerji A., Lukitsch M.J., Alpas A.T., "Friction Reduction Mechanisms in Cast Iron Sliding Against DLC: Effect of Biofuel (E85) Diluted Engine Oil", Wear, 368, 2016, 196-209
http://www.sciencedirect.com/science/article/pii/S004316481630240X
177. Bhowmick S., Banerji A., Alpas A.T., "Friction Reduction Mechanisms in Multilayer Graphene Sliding Against Hydrogenated Diamond-like Carbon", Carbon, 109, 2016, 795-804.
http://www.sciencedirect.com/science/article/pii/S0008622316306911
176. Bhattacharya S., Alpas A.T., "Self-healing of Cracks Formed in Silicon-Aluminum Anodes Electrocemically Cycled at High Lithiation Rates", Journal of Power Sources, 328, 2016, 300-310.
http://www.sciencedirect.com/science/article/pii/S037877531630996X
175. Bhowmick S., Sun G., Alpas A.T., "Low Friction Behaviour of Boron Carbide Coatings (B4C) Against Ti-6Al-4V", Surface and Coatings Technology.
http://www.sciencedirect.com/science/article/pii/S025789721630723X
174. Banerji A., Lukitsch M.J., Alpas A.T., "Friction Behaviour of Multilayered Graphene Against Steel", MRS Proceedings, 1812, 2016.
https://www.cambridge.org/core/journals/mrs-online-proceedings-library-a...
2015
173. Bhowmick S., Banerji A., Alpas A.T., "Tribological Behaviour of W-DLC Against an Aluminium Alloy Subjected to Lubricated Sliding", Tribology in Industry, 37, 2015, 277-283.
http://www.tribology.fink.rs/last.html
172. Rahbar-Kelishami A., Abdollah-Zadeh A., Hadavi M.M., Banerji A., Alpas A., Gerlich A.P., "Effects of Friction Stir Processing on Wear Properties of WC-12%Co Sprayed on 52100 Steel", Materials & Design, 86, 2015, 98-104.
http://www.sciencedirect.com/science/article/pii/S0264127515300204
171. Bhowmick S., Banerji A., Alpas A.T., "Tribological Behaviour of Al-6.5%, -12%, -18.5% Si Alloys During Machining Using CVD Diamond and DLC Coated Tools", Elsevier, 284, 2015, 353-364.
http://www.sciencedirect.com/science/article/pii/S0257897215005253
170. Bhowmick S., Banerji A., Khan M.Z., Lukitsch M.J., Alpas A.T., "High Temperature Tribological Behaviour of Tetrahedral Amorphous Carbon (ta-C) and Fluorinated ta-C Coatings against Aluminum Alloys", Surface and Coatings Technology, 284, 2015, 14-25.
http://www.sciencedirect.com/science/article/pii/S025789721500523X
169. Bhowmick S., Banerji A., Lukitsch M.J., Alpas A.T., "The High Temperature Tribological Behaviour of Si, O Containing Hydrogenated Diamond-Like Carbon (aC: H/a-Si: O) Coating Against an Aluminum Alloy", Wear, 330, 2015, 261-271.
http://www.sciencedirect.com/science/article/pii/S0043164815000976
168. Bhowmick S., Banerji A., Alpas A.T., "Role of Humidity in Reducing Sliding Friction of Multilayered Graphene", Carbon, 87, 2015, 374-384.
http://www.sciencedirect.com/science/article/pii/S0008622315000780
167. Bhowmick S., Sen F.G., Banerji A., Alpas A.T., "Friction and Adhesion of Hydrophobic Fluorine Containing Hydrogenated Diamond-like Carbon (F-H-DLC) Coating against Magnesium Alloy AZ91, Surface and Coatings Technology, 267, 2015, 21-31.
http://www.sciencedirect.com/science/article/pii/S0257897214010688
166. Gali O.A., Riahi A.R., Alpas A.T., "The Effect of Surface Conditions on the Elevated Temperature Sliding Contact Deformation of AA5083 Alloy", Wear, 330-331, 2014, 309-319.
http://www.sciencedirect.com/science/article/pii/S0043164814004074
2014
165. Bhowmick S., Banerji A., Alpas A.T., "Tribological Behaviour and Machining Performance of Non-Hydrogenated Diamond-like Carbon Coating Tested Against Ti-6Al-4V: Effect of Surface Passivation by Ethanol", Surface and Coatings Technology, 260, 2014, 290-302.
http://www.sciencedirect.com/science/article/pii/S0257897214006203
164. Bhattacharya S., Reza Riahi A., Alpas A.T., "Electrochemical Cycling Behaviour of Lithium Carbonate (Li2CO3) Pre-trated Graphite Anodes-SEI Formation and Graphite Damage Mechanisms" Carbon, 77, 2014, 99-112.
http://www.sciencedirect.com/science/article/pii/S0008622314004515
163. Sen G.F., Alpas A.T., Van Duin A.C.T., Qi, Y., "Oxidation - Assisted Ductility of Aluminium Nanowires", Nature Communications, 5, 3959, 2014, 5:3959 | DOI: 10.1038/ncomms4959.
http://www.nature.com/ncomms/2014/140602/ncomms4959/full/ncomms4959.html.
162. Banerji A., Edrisy A., Francis V., Alpas A.T., "Effect of bio-fuel (E85) addition on lubricated sliding wear mechanisms of a eutectic Al-Si alloy" Wear, 311, 2014, 1-13.
http://www.sciencedirect.com/science/article/pii/S0043164813006078
161. Bhattacharya S., Riahi A.R., Alpas A.T., "Thermal Cycling Induced Capacity Enhancement of Graphite Anodes in Lithium-ion Cells", Carbon, 2014, 592-606.
http://www.sciencedirect.com/science/article/pii/S0008622313009792
160. Banerji, A., Bhowmick S., Alpas A.T., "High Temperature Tribological Behaviour of W containing Diamond-Like Carbon (DLC) Coating against Titanium Alloys, Surface and Coatings Technology, 241, 2014, 93-104.
http://www.sciencedirect.com/science/article/pii/S0257897213010098
2013
159. Bhowmick S., Alpas A.T., "The Performance of Diamond-Like Carbon Coated Drills in Thermally Assisted Drilling of Ti-6Al-4V", Transactions of the ASME Journal of Manufacturing Science and Engineering, 315, 2013, 061019.
http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?...
158. Bhattacharya, S., Alpas, A.T., "Role of Sliding-Induced Tribofilms on Fracture of Particles in Aluminum-Silicon Alloys", Wear, 301, 2013, 707-716.
http://www.sciencedirect.com/science/article/pii/S0043164813001038
157. Banerji A., Hu, H., Alpas, A.T., "Sliding Wear Mechanisms of Magnesium Composites AM60 Reinforced with Al2O3 Fibres under Ultra-Mild Wear Conditions", Wear, 301, 2013, 626-635.
http://www.sciencedirect.com/science/article/pii/S0043164813001130
156. Gali O.A., Riahi A.R., Alpas A.T., "The Tribological Behaviour of AA5083 Alloy Plastically Deformed at Warm Forming Temperatures", Wear, 302, 2013, 1257-1267.
http://www.sciencedirect.com/science/article/pii/S0043164812004760
155. Sen, F.G., Qi, Y,. Alpas, A.T., "Tribology of Fluorinated Diamond-Like Carbon Coatings: First Principles Calculations and Sliding Experiments, Lubrication Science, 25, 2013, 111-121.
http://onlinelibrary.wiley.com/doi/10.1002/ls.1166/full
154. Sen F.G., Qi Y., van Duin A.C.T., Alpas A.T., "Oxidation Induced Softening in Al Nanowires", Applied Physics Letters, 102, 2013, 051912.
http://scitation.aip.org/content/aip/journal/apl/102/5/10.1063/1.4790181
153. Sen F.G., Meng-Burany X., Lukitsch M., Qi Y., Alpas A.T., "Low Friction and Environmentally Stable Diamond-like Carbon (DLC) Coatings Incorporating Si and F Sliding Against Aluminum", Surface and Coatings Technology, 215, 2013, 340-349.
http://www.sciencedirect.com/science/article/pii/S0257897212010900
2012
152. Bhattacharya S., Alpas A.T., "Micromechanisms of Solid Electrolyte Interphase Formation on Electrochemically Cycled Graphite Electrodes in Lithium-Ion Cells", Carbon, 50, 2012, 5359-5371.
http://www.sciencedirect.com/science/article/pii/S0008622312005933
151. Rashwan O.H., Stoilov V., Alpas A.T., Guerrero A.R., "Effect of Surface Pattering on the Adhesive Friction", ASME, 3, 2012, 2117-2124.
http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articl...
150. Sen F.G., Qi Y., Alpas A.T., "Anchoring Platinum on Graphene using Metallic Adatoms: A first principles investigation", Journal of Physics: Condensed Matter, 24, 2012, 225003.
http://iopscience.iop.org/0953-8984/24/22/225003
149. Banerji A., Hu H., Alpas A.T., "Ultramild Wear of A12O3 Fibre and Particle Reinforced Magnesium Matrix Composite", Advanced Materials Research, 445, 2012, 503-508.
http://www.scientific.net/AMR.445.503
148. Das S., Riahi A.R., Meng-Burany X., Morales A.T., Alpas A.T., "High Temperature Deformation and Fracture of Tribo-Layers on the Surface of AA5083 Sheet Aluminum-Magnesium Alloy", Materials Science and Engineering A, 531, 2012, 76-83.
http://www.sciencedirect.com/science/article/pii/S092150931101135X
147. Sachdev A.K., Mishra R.K., Mahato A., Alpas A.T., "Vehicle Lightweighting: Challenges and Oppurtunities with Aluminum", 13th International Conference on Aluminum Alloys (ICAA13), John Wiley & Sons, Inc., 2012, 609-622.
http://onlinelibrary.wiley.com/doi/10.1002/9781118495292.ch89/summary
146. Banerji A., Hu H., Alpas A.T., "Sliding Wear Behavior of Squeeze Cast Magnesium Composite AM60-9% (Al2O3)f", Magnesium Technology 2012, 2012, 169-174.
http://onlinelibrary.wiley.com/doi/10.1002/9781118359228.ch32/summary
145. Bhattacharya S., Riahi A.R., Alpas A.T., "Role of Voltage Scan on Degradation of Graphite Electrodes Electrochemically Cycled vs. Li/Li+", MRS Proceedings, 1388, 2012.
http://journals.cambridge.org/action/displayAbstract?fromPage=online&aid...
2011
144. Abougharam A., Lukitsch M.J., Alpas A.T., "High Temperature Tribological Behaviour of W-DLC Against Aluminum", Surface and Coatings Technology, 206, 2011, 1905-1912.
http://www.sciencedirect.com/science/article/pii/S0257897211008000
143. Bhattacharya S., Riahi A.R., Alpas A.T., "Role of Applied Voltage on Damage of Graphite Electrodes Electrochemically Cycled vs. Li/Li+" 1388, 2011.
http://www.researchgate.net/profile/Sandeep_Bhattacharya2/publication/23...
142. Bhattacharya S., Riahi A.R., Alpas A.T., "A Transmission Electron Microscopy Study of Crack Formation and Propagation in Electrochemically Cycled Graphite Electrode in Lithium-Ion Cells", Journal of Power Sources, 196, 2011, 8719-8727.
http://www.sciencedirect.com/science/article/pii/S0378775311011050
141. Bhattacharya S., Riahi A.R., Alpas A.T., "Effect of Li2CO3 Deposition on Electrochemical Cycling Induced Graphite Damage", ECS Transactions, 35, 2011, 27-38.
http://ecst.ecsdl.org/content/35/14/27.short
140. Shafiei M., Alpas A.T., "A Transmission Electron Microscopy Study of Degredation Mechanisms in Tin-Carbon Fibre Composite Anode for Rechargeable Lithium-Ion Betteries", ECS Transactions, 35, 2011, 7-17.
http://ecst.ecsdl.org/content/35/14/7.short
139. Bhowmick S., Alpas A.T., "The Role of Diamond-Like Carbon Coated Drills on Minimum Quantity Lubrication Drilling of Magnesium Alloys", Surface & Coatings Technology, 205, 2011, 5302-5311.
http://www.sciencedirect.com/science/article/pii/S0257897211005482
138. Shafiei M., Alpas A.T., "Electrochemical Performance of a Tin-Coated Carbon Fibre Electrode for Rechargeable Lithium-Ion Batteries", Journal of Power Sources, 196, 2011, 7771-7778.
http://www.sciencedirect.com/science/article/pii/S0378775311008937
137. Das S., Morales A.T., Riahi A.R., Meng-Burany X., Alpas A.T., “Role of Plastic Deformation on Elevated Temperature Tribological Behaviour of an Al-Mg Alloy (AA5083): A Friction Mapping”, Materials and Metallurgical Transactions A, 42, 2011, 2384-2401.
http://link.springer.com/article/10.1007/s11661-011-0649-4
136. Dey S.K., Lukitsch M.J., Balogh M.P., Meng-Burany X., Alpas A.T., “Ultra-Mild Wear Mechanisms of Al-12.6 wt.% Si Alloys at Elevated Temperature”, Wear, 271, 2011, 1842-1853.
http://www.sciencedirect.com/science/article/pii/S0043164811003462
135. Abougharam A., Lukitsch M.J., Qi Y., Alpas A.T., “Role of Oxygen and Humidity on the Tribochemical Behaviour of Non-Hydrogenated Diamond-Like Carbon Coatings”, Wear, 271, 2011, 2157-2163.
http://www.sciencedirect.com/science/article/pii/S0043164811003425
134. Bhattacharya S., Riahi A.R., Alpas A.T., “Characterization of Electrochemical Cycling Induced Graphite Electrode Damage in Lithium-Ion Cells”, Ceramic Transactions, 116, 2011.
http://books.google.ca/books?hl=en&lr=&id=xCiX__380Y4C&oi=fnd&pg=PA17&dq...
133. Sen F.G., Qi Y., Alpas A.T., “Material Transfer Mechanisms between Aluminum and Fluorinated Carbon Interfaces”, Acta Materialia, 59, 2011, 2601–2614.
http://www.sciencedirect.com/science/article/pii/S1359645410008773
132. Sen F.G., Qi Y., Alpas A.T., "Anchroing Platinum on Graphene Using Metallic Adatoms", American Physical Society, 2011.
http://adsabs.harvard.edu/abs/2011APS..MARL10015S
131. Bhattacharya S., Riahi A.R., Alpas A.T., "Effect of Li2CO3 Deposition on Electrochemical Cycling Induced Graphite Damage Observed Using In Situ Optical Microscopy", ECS Meeting Abstracts, 10, 2011, 462-462.
http://ma.ecsdl.org/content/MA2011-01/10/462.short
130. Shafiei M., Alpas A.T., "Microstructure and Degredation Mechanisms of a Tin-Coated Carbon Fibre Electrode for Lithium-Ion Batteries", ECS Meeting Abstracts, 10, 2011, 448-448.
http://ma.ecsdl.org/content/MA2011-01/10/448.short
129. Bhattacharya S., Riahi A.R., Alpas A.T., “In-Situ Observations of Lithiation/Delithiation Induced Graphite Damage during Electrochemical Cycling”, Scripta Materialia, 64, 2011, 165-168.
http://www.sciencedirect.com/science/article/pii/S1359646210006536
128. Meng-Burany X., Perry T.A., Sachdev A.K., Alpas A.T., “Subsurface Sliding Wear Damage Characterization in Al-Si Alloys Using Focused Ion Beam and Cross-Sectional TEM Techniques”, Wear, 270, 2011, 152-162.
http://www.sciencedirect.com/science/article/pii/S1359646210006536
2010
127. Abougharam A., Lukitsch M.J., Balogh M.P., Alpas A.T., “High Temperature Tribological Behaviour of Carbon Based (B4C and WC-DLC) Coatings against Aluminum”, Thin Solid Films, 519, 2010, 1611–1617.
http://www.sciencedirect.com/science/article/pii/S0040609010010242
126. Bhowmick S., Lukitsch M.J., Alpas A.T., “Tapping of Al-6.5%Si Alloys with Diamond-Like Carbon Coated Tools and Minimum Quantity Lubrication”, Journal of Materials Processing Technology, 210, 2010, 2142-2153.
http://www.sciencedirect.com/science/article/pii/S0924013610002323
125. Shafiei M., Riahi A.R., Sen F.G., Alpas A.T., “Improvement of Platinum Adhesion to Carbon Surfaces Using PVD Coatings”, Surface & Coatings Technology, 205, 2010, 306-311.
http://www.sciencedirect.com/science/article/pii/S0257897210004810
124. Bhowmick S., Lukitsch M., Alpas A.T., “Dry and Minimum Quantity Lubrication Drilling of a Magnesium (AM60) Alloy”, International Journal of Machine Tools & Manufacture, 50, (2010), 444–457.
http://www.sciencedirect.com/science/article/pii/S0890695510000271
123. Das S., Morales A.T., Alpas A.T., “Microstructural Evolution during High Temperature Sliding Wear of Mg-3%Al-1%Zn (AZ31) Alloy”, Wear, 268, (2010), 94-103.
http://www.sciencedirect.com/science/article/pii/S0043164809004542
2009
122. Bhattacharya S., Riahi A.R., Alpas A.T., “Indentation-Induced Subsurface Damage in Silicon Particles of Al-Si Alloys”, Materials Science and Engineering A, 572, (2009), 387-396.
http://www.sciencedirect.com/science/article/pii/S0921509309009824
121. Shafiei M., Alpas A.T., “Nanocrystalline Nickel Films with Lotus Leaf Texture for Superhydrophobic and Low Friction Surfaces”, Applied Surface Science, 256, (2009), 710-719.
http://www.sciencedirect.com/science/article/pii/S0169433209011842
120. Chen P., Alpas A.T., “Effect of Bismuth on the Tensile Properties and Dry Machining Performance of Al-12.7 wt% Si Alloy”, Ceramic Transactions, 207, (2009), 215-223.
http://books.google.ca/books?hl=en&lr=&id=IVRBIomW2aoC&oi=fnd&pg=PA215&d...
119. Sen F.G., Qi Y., Alpas A.T., “Surface Stability and Electronic Structure of Hydrogen and Fluorine Terminated Diamond Surfaces: A First Principles Investigation”, Journal of Materials Research, 24, (2009), 2461-2470.
http://journals.cambridge.org/action/displayAbstract?fromPage=online&aid...
118. Dey S.K., Perry T.A., Alpas A.T., “Micromechanisms of Low Load Wear in an Al-18.5% Si Alloy”, Wear, 267, (2009), 515-524.
http://www.sciencedirect.com/science/article/pii/S0043164809000842
117. Riahi A.R., Edrisy A., Alpas A.T., “Effect of Magnesium Content on the High Temperature Adhesion of Al-Mg Alloys to Steel Surfaces”, Surface & Coatings Technology, 203, (2009), 2030-2035.
http://www.sciencedirect.com/science/article/pii/S0257897209000693
116. Sen F.G., Qi Y., Alpas A.T., "Improvement of the Pt/Graphene Interface Adhesion by Metallic Adatoms for Fuel Cell Applications", MRS Proceedings, 1213, (2009), 1213-T07-02.
http://journals.cambridge.org/action/displayAbstract?fromPage=online&aid...
2008
115. Shafiei M., Alpas A.T., “Fabrication of Biotextured Nanocrystalline Nickel Films for the Reduction and Control of Friction”, Materials Science and Engineering C28, (2008), 1340-1346.
http://www.sciencedirect.com/science/article/pii/S0928493108000325
114. Chen M., Meng-Burany X., Perry T.A., Alpas A.T., “Micromechanisms and Mechanics of Ultra-Mild Wear in Al-Si Alloys”, Acta Materialia, 56, (2008), 5605-5616.
http://www.sciencedirect.com/science/article/pii/S1359645408005326
113. Bhowmick S., Alpas A.T., “Minimum Quantity Lubrication Drilling of Aluminum-Silicon Alloys in Water Using Diamond-Like Carbon Coated Drills”, International Journal of Machine Tools & Manufacture, 48, (2008), 1429-1443.
http://www.sciencedirect.com/science/article/pii/S0890695508000825
112. Shafiei M., Alpas A.T., “Effect of Sliding Speed on Friction and Wear Behaviour of Nanocrystalline Nickel Tested in an Argon Atmosphere”, Wear, 265, (2008), 429-438.
http://www.sciencedirect.com/science/article/pii/S004316480700751X
111. Akarca S.S., Song X., Altenhof W.J., Alpas A.T., “Deformation Behaviour of Aluminium during Machining: Modelling by Eulerian and Smoothed-Particle Hydrodynamics Methods”, Materials: Design and Applications, 222, (2008), 209-221.
http://pil.sagepub.com/content/222/3/209.short
110. Bhowmick S., Alpas A.T., “The Performance of Hydrogenated and Non-Hydrogenated Diamond-Like Carbon Tool Coatings during the Dry Drilling of 319 Al”, International Journal of Machine Tools & Manufacture, 48, (2008), 802-814.
http://www.sciencedirect.com/science/article/pii/S0890695507002623
109. Chen M., Alpas A.T., “Ultra-Mild Wear of a Hypereutectic Al-18.5 wt.% Si Alloy”, Wear, 265, (2008), 186-195.
http://www.sciencedirect.com/science/article/pii/S004316480700676X
108. Riahi R., Morales A.T., Alpas A.T., “Evaluation of Vitreous and Devitrifying Enamels as Hot Forming Lubricants for Aluminum AA5083 Alloy”, Journal of Materials Engineering and Performance, 17, (2008), 387-394.
http://link.springer.com/article/10.1007/s11665-008-9208-6
107. Shafiei M., Alpas A.T., “Superhydrophobic Nanocrystalline Nickel Films Inspired by Lotus Leaf", MRS Proceedings, 1132, (2008), 1132-Z07-17.
http://journals.cambridge.org/action/displayAbstract?fromPage=online&aid...
2007
106. Riahi R., Alpas A.T., “Adhesion of AA5182 Aluminum Sheet to DLC and TiN Coatings at 25 ºC, 300 ºC and 420 ºC”, Surface Coatings and Technology, 202, 2007, 1055-1061.
http://www.sciencedirect.com/science/article/pii/S0257897207008195
105. Yazdanian M.M., Edrisy A., Alpas A.T., “Vacuum Sliding Behaviour of Thermally Oxidized Ti-6Al-4V Alloy”, Surface Coatings and Technology, 202, 2007, 1182-1188.
http://www.sciencedirect.com/science/article/pii/S0257897207005907
104. Meng-Burany X., Alpas A.T., “FIB and TEM Studies of Damage Mechanisms in DLC Coatings Sliding against Aluminum”, Thin Solid Films, 516, 2007, 325-335.
http://www.sciencedirect.com/science/article/pii/S0040609007009467
103. Chen M., Perry T.A., Alpas A.T., “Ultra-Mild Wear in Eutectic Al-Si Alloys”, Wear, 263, 2007, 552-561.
http://www.sciencedirect.com/science/article/pii/S0043164807003122
102. Meng-Burany X., Alpas A.T., “FIB and TEM Studies of Adhesion between Al and DLC Coatings", Microscopy and Microanalysis, S02, 2007, 1540-1541.
http://journals.cambridge.org/action/displayAbstract?fromPage=online&aid...
101. Shafiei M., Alpas A.T., “Friction and Wear Mechanisms of Nanocrystalline Nickel in Ambient and Inert Atmospheres”, Metallurgical and Materials Transactions, 38A, 2007, 1621-1631.
http://link.springer.com/article/10.1007/s11661-007-9157-y
100. Akarca S.S., Altenhof W.J., Alpas A.T., “Subsurface Deformation and Damage Accumulation in an Aluminum-Silicon Alloy Subjected to Sliding Contact”, Tribology International, 40, 2007, 735-747.
http://www.sciencedirect.com/science/article/pii/S0301679X06002088
99. Konca E., Cheng Y.T., Weiner A.M., Dasch J.M., Alpas A.T., “The Role of Hydrogen in the Test Atmosphere on the Tribological Behaviour of the Nonhydrogenated DLC Coatings Against 319 Aluminium Alloy”, Tribology Transactions, 50, 2007, 178-186.
http://www.tandfonline.com/doi/abs/10.1080/10402000701260906
98. Elmadagli M, Perry T.A., Alpas A.T., “A Parametric Study of the Relationship between Microstructure and Wear Resistance of Al-Si Alloys”, Wear, 262, 2007, 79-92.
http://www.sciencedirect.com/science/article/pii/S0043164806001487
97. Shafiei M., Alpas A.T., “Friction and Wear Behaviour of Nanocrystalline Cobalt", ASME, IJTC2007, 2007, 11-13.
http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articl...
2006
96. Konca E., Cheng Y.T., Alpas A.T., “Sliding Wear of Non-hydrogenated Diamond-like Carbon Coatings against Magnesium”, Surface and Coatings Technology, 201, 2006, 4352-4356.
http://www.sciencedirect.com/science/article/pii/S0257897206008899
95. Riahi A. R., Alpas A. T., “Fracture of Silicon Rich Particles during Sliding Contact of Al-Si Alloys”, Materials Science Engineering A, 441, 2006, 326-330.
http://www.sciencedirect.com/science/article/pii/S0921509306017965
94. Elmadagli M., Alpas A.T., “Sliding Wear of an Al – 18.5 wt. % Si Alloy Tested in an Argon Atmosphere and against DLC Coated Counterfaces”, Wear, 261, 2006, 823-834.
http://www.sciencedirect.com/science/article/pii/S0043164806000172
93. Konca E., Cheng Y.T., Alpas A. T., “Dry Sliding Behaviour of Non-Hydrogenated DLC Coatings against Al, Cu and Ti in Ambient Air and Argon”, Diamond and Related Materials, 15, 2006, 939-943.
http://www.sciencedirect.com/science/article/pii/S0925963505005625
92. Elmadagli M., Alpas, A. T., “Progression of Wear in the Mild Wear Regime of Al-18.5% Si (A390) Alloy”, Wear, 261, 2006, 367-381.
http://www.sciencedirect.com/science/article/pii/S0043164805005016
91. Qi Y., Konca E., Alpas A. T., “Atmospheric Effects on the Adhesion and Friction between Non-Hydrogenated Diamond-Like-Carbon (DLC) Coating and Aluminum – A First Principles Investigation”, Surface Science, 600, 2006, 2955-2965.
http://www.sciencedirect.com/science/article/pii/S0039602806005978
90. Li J., Elmadagli M., Gertsman V.Y., Lo J., Alpas A.T., “FIB and TEM Characterization of Subsurfaces of an Al-Si Alloy (A390) Subjected to Sliding Wear”, Materials Science and Engineering A, 421, 2006, 317-327.
http://www.sciencedirect.com/science/article/pii/S0921509306001614
89. Konca E., Cheng Y.T., Weiner M., Dasch J.M., Alpas A.T., “Elevated Temperature Tribological Behaviour of Non-Hydrogenated Diamond-like-Carbon Coatings against 319 Aluminium Alloy”, Surface and Coatings Technology, 200, 2006, 3996-4005.
http://www.sciencedirect.com/science/article/pii/S0257897205004421
88. Akarca S.S., Altenhof W.J. and Alpas A.T., "Finite Element Analysis of Sliding Contact Between a Circular Asperity and an Elastic Urface in Plane Strain Condition", Proceedings of the International LS-DYNA Users Conference, 2006, 5(41-50).
http://www.dynalook.com/international-conf-2002/Session_5-5.pdf
87. Chen M., Alpas A.T., "Ultra-Mild Wear of Aluminum Alloys: Role of Silicon Particles", STLE/ASME 2006 International Joint Tribology Conference, 2006, 557-558.
http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articl...
2005
86. Konca E., Cheng Y.T., Weiner A.M., Dasch J.M., Erdemir A., Alpas A.T., “Transfer of 319 Al Alloy to Titanium Diboride and Titanium Nitride Based (TiAIN, TiCN, TiN) Coatings: Effects of Sliding Speed, Temperature and Environment”, Surface and Coatings Technology, 200, 2005, 2260-2270.
http://www.sciencedirect.com/science/article/pii/S0257897204009831
85. Konca E., Cheng Y.T., Weiner A.M., Dasch J.M., Alpas A.T., “Effect of Test Atmosphere on the Tribological Behaviour of the Non-Hydrogenated Diamond-Like Carbon Coatings against 319 Aluminum Alloy and Tungsten Carbide”, Surface and Coatings Technology, 200, 2005, 1783-1791.
http://www.sciencedirect.com/science/article/pii/S0257897205008728
84. Edrisy A., Perry T., Alpas A.T., “Wear Mechanism Maps for Thermal Spray Steel Coatings”, Metallurgical and Materials Transactions A, 36, 2005, 2737-2750.
http://link.springer.com/article/10.1007/s11661-005-0270-5#page-1
83. Edrisy A., Perry, T., Alpas A.T., “Investigation of Scuffing Damage in Aluminum Engines with Thermal Spray Coatings”, Wear, 259, 2005, 1056-1062.
http://www.sciencedirect.com/science/article/pii/S0043164805001420
82. Konca E., Cheng Y.T., Weiner A.M., Dasch J.M., Alpas A.T., “Vacuum Tribological Behaviour of the Non-Hydrogenated Diamond-like Carbon Coatings against Aluminum: Effect of Running-in in Ambient Air”, Wear, 259, 2005, 795-799.
http://www.sciencedirect.com/science/article/pii/S0043164805001523
81. Xie J., Alpas A.T., Northwood D. O., “The Role of the Heat Treatment on the Erosion-corrosion Behaviour of AlSl 52100 Steel”, Materials Science and Engineering A, 393, 2005, 42-50.
http://www.sciencedirect.com/science/article/pii/S092150930401233X
80. Konca E., Cheng Y.T., Alpas A.T., "Sliding Wear of Non-Hydrogenated Diamond-Like Carbon Coatings Against Al, Cu and Ti", ASME, WTC2005-64100, 2005, 491-492.
http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articl...
79. Shafiei M., Alpas A.T., "Friction and Wear Behaviour of Nanocrystalline Nickel", ASME, WTC2005-64315, 2005, 183-184.
http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articl...
2004
78. Nie X., Wang L., Konca E., Alpas A.T., “Tribological Behaviour of Oxide/Graphite Composite Coatings Deposited Using Electrolytic Plasma Process”, Surface and Coatings Technology, 188-189, 2004, 207-213.
http://www.sciencedirect.com/science/article/pii/S0257897204006619
77. Ni H., Elmadagli M., Alpas A.T., “Mechanical Properties and Microstructures of 1100 Aluminum Subjected to Dry Machining”, Materials Science and Engineering A, 385, 2004, 267-278.
http://www.sciencedirect.com/science/article/pii/S0921509304008743
76. Raczy A., Elmadagli M., Altenhof W. J., Alpas A. T., “An Eulerian Finite-Element Model for Determination of Deformation State of a Copper Subjected to Orthogonal Cutting”, Metallurgical and Materials Transaction, 35A, 2004, 2393-2400.
http://link.springer.com/article/10.1007/s11661-006-0219-3#page-1
75. Raczy A., Altenhof W. J., Alpas A. T., “An Eulerian Finite Element Model of the Metal Cutting Process", Proceedings of 8th International Ls-Dyna Users Conference, 2004,11-25
http://www.dynalook.com/international-conf-2004/09-2.pdf
74. Altenhof W., Raczy A., Laframboise M., Loscher J., Alpas, A.T., “Numerical Simulation of AM50A Magnesium Alloy under Large Deformation”, International Journal of Impact Engineering, 30, 2004, 117-142.
http://www.sciencedirect.com/science/article/pii/S0734743X03000605
2003
73. Edrisy A., Perry T., Cheng Y.T., Alpas A.T., "Wear Mechanisms in Thermal Spray Coatings", Tribology Series, 41, 2003, 323-327.
http://www.sciencedirect.com/science/article/pii/S0167892203801451
72. Xie J., Alpas A.T., Northwood D. O., “Mechano-electrochemical Effect between Erosion and Corrosion”, Journal of Materials Science38, 2003, 4849-4856.
http://link.springer.com/article/10.1023/B:JMSC.0000004404.53054.b4#page-1
71. Ni H., Alpas A.T., “Sub-micrometer Structures Generated during Dry Machining of Copper”, Materials Science and Engineering A, 361, 2003, 338-349.
http://www.sciencedirect.com/science/article/pii/S0921509303005306
70. Riahi A.R., Alpas A.T., “Wear Map for Grey Cast Iron”, Wear, 255, 2003, 401-409.
http://www.sciencedirect.com/science/article/pii/S0043164803001005
69. Elmadagli M., Alpas A.T., “Metallographic Analysis of the Deformation Microstructure of Copper Subjected to Orthogonal Cutting”, Materials Science and Engineering A, 355, 2003, 249-259.
http://www.sciencedirect.com/science/article/pii/S0921509303000728
68. Riahi A.R., Perry, T., Alpas A.T., “Scuffing Resistances of Al-Si Alloys: Effects of Etching Condition, Surface Roughness and Particle Morphology”, Materials Science and Engineering A, 343, 2003, 76-81.
http://www.sciencedirect.com/science/article/pii/S0921509302003222
67. Xie J., Alpas A.T., Northwood, D. O., “The Effect of Erosion on the Electrochemical Properties of AISI 1020 Steel”, Journal of Materials Engineering and Performance, 12(1), 2003, 77-86.
http://link.springer.com/article/10.1361/105994903770343510#page-1
66. Riahi A.R., Perry T., Alpas A.T., "Scuffing Resistance of AlA", Materials Science and Engineering, 343, 76, 81 , 2003.
65. Edrisy A., Alpas A.T., “Wear Behaviour of PTWA and HVOF Iron Based Thermal Spray Coatings: Effects of Composition and Microstructures”, Society of Manufacturing Engineers, 2003, FC03-161.
2002
64. Edrisy A., Alpas A.T., “Microstructures and Sliding Wear Resistances of 0.2% Carbon Steel Coatings Deposited by HVOF and PTWA Thermal Spray Processes”, Thin Solid Films, 420-421, 2002, 338-344.
http://www.sciencedirect.com/science/article/pii/S0040609002009379
63. Zhang H., Alpas A.T., “Quantitative Evaluation of Plastic Strain Gradients Generated during Orthogonal Cutting of an Aluminum Alloy”, Materials Science and Engineering A, 332, 2002, 249-254.
http://www.sciencedirect.com/science/article/pii/S092150930101752X
62. Xie J., Alpas A.T., Northwood D.O., “A Mechanism for the Crack Initiation of Corrosion Fatigue of Type 316L Stainless Steel in Hank’s Solution”, Materials Characterization, 48, 2002, 271-277.
http://www.sciencedirect.com/science/article/pii/S1044580302002450
61. Hu H., Spadafora A.S., Turchi R.F., Alpas A.T., "Solution Treatment and Artificial Aging of Vacuum Die Cast Alloy A380", Light Metals, 2002
https://inis.iaea.org/search/search.aspx?orig_q=RN:36058947
2001
60. Edrisy A., Perry T., Cheng Y.T., Alpas A.T., “The Effect of Humidity on the Sliding Wear of Plasma Transfer Wire Arc Thermal Sprayed Low Carbon Steel Coatings”, Surface and Coatings Technology, 146-147, 2001, 571-577.
http://www.sciencedirect.com/science/article/pii/S0257897201014347
59. Edrisy A., Perry T., Cheng Y.T., Alpas A.T., “Wear of Thermal Spray Deposited Low Carbon Steel Coatings on Aluminum Alloys”, Wear, 251, 2001, 1023-1033.
http://www.sciencedirect.com/science/article/pii/S0043164801007189
58. Riahi A.R., Alpas A.T., “The Role of Tribo-layers on the Sliding Wear Behavior of Graphitic Aluminum Matrix Composites”, Wear, 251, 2001, 1396-1407.
http://www.sciencedirect.com/science/article/pii/S0043164801007967
2000
57. Chen H., Alpas A.T., “Sliding Wear Map for the Magnesium Alloy Mg-9Al-0.9 Zn (AZ91)”, Wear, 246, 2000, 106-116.
http://www.sciencedirect.com/science/article/pii/S0043164800004956
56. Wilson S., Alpas A.T., “Tribo-layer Formation during Sliding Wear of TiN Coatings”, Wear, 245, 2000, 223-229.
http://www.sciencedirect.com/science/article/pii/S0043164800004828
55. Hutchings I.M., Wilson S., Alpas A.T., “Wear of Aluminum-based Composites”, Comprehensive Composite Materials, 3, 2000, 501-519.
http://publications.eng.cam.ac.uk/329373/
54. Alpas A.T., Inagaki J., “Effect of Microstructure on Fracture Mechanisms in Galvannealed Coatings”, International Journal of Iron and Steel Institute of Japan, 40, 2000, 172-181.
https://www.jstage.jst.go.jp/article/isijinternational1989/40/2/40_2_172...
1999
53. Wilson S., Alpas A.T., “Wear Mechanism Maps for TiN-Coated High Speed Steel”, Surface and Coatings Technology, 120-121, 1999, 519-527.
http://www.sciencedirect.com/science/article/pii/S0257897299004144
52. Wilson S., Alpas A.T., “Thermal Effects on Mild Wear Transitions in Dry Sliding of an Aluminum Alloy”, Wear, 225-229, 1999, 440-449.
http://www.sciencedirect.com/science/article/pii/S0043164899000174
51. Xie X., Wu Y., Alpas A.T., Northwood, D.O., “Fracture Analysis of a Hip Joint Fractured in-Vivo”, Microstructural Science, 26, 1999, 167-170.
1998
50. Alpas A.T., Wilson S., "Tribo-Layer Formation During Sliding Wear of TiN Coatings", Wear (Switzerland) , 245, 1998, 223-229.
49. Wilson S., Alpas A.T., “TiN Coating Wear Mechanisms in Dry Sliding Contact against High Speed Steel”, Surface and Coatings Technology, 108-109, 1998, 369-376.
http://www.sciencedirect.com/science/article/pii/S0257897298005933
48. Northwood D.O., Alpas A.T., “Mechanical and Tribological Properties of Nanocrystalline and Nanolaminated Surface Coatings”, Nanostructured Materials, 10, 1998, 777-793.
http://www.sciencedirect.com/science/article/pii/S0965977398001159
47. Xie J., Alpas A.T., Northwood N.D., "Synergistic Effect of Erosion and Corrosion on AlSi 1018 and AlSi 521000 Steel", Institution of Engineers, AUSTRIB'98, Tribology at work: Proceedings of the 5th International Tribology Conference, 1998, 459.
https://search.informit.com.au/documentSummary;dn=444619367376334;res=IE...
1997
46. Wilson S., Alpas A.T., “Wear Mechanism Maps for Metal Matrix Composites”, Wear, 212, 1997, 41-49.
http://www.sciencedirect.com/science/article/pii/S0043164897001427
45. Ding Y., Northwood D.O., Alpas A.T., “Fabrication by Magnetron Sputtering of Al-Cu-Fe Quasicrystalline Films for Tribological Applications”, Surface and Coatings Technology, 96, 1997, 140-147.
http://www.sciencedirect.com/science/article/pii/S0257897297000807
44. Wilson S., Alpas A.T., “Effect of Temperature and Sliding Velocity on TiN Coating Wear”, Surface and Coatings Technology, 94-95, 1997, 53-59.
http://www.sciencedirect.com/science/article/pii/S0257897297004751
43. Ding Y., Zhang Y., Northwood D.O., Alpas A.T., “PVD NiAl Intermetallic Coatings: Microstructure and Mechanical Properties”, Surface and Coatings Technology, 94-95, 1997, 483-489.
http://www.sciencedirect.com/science/article/pii/S0257897297003447
42. Zhang J., Alpas A.T., “Transition Between Mild and Severe Wear in Aluminium Alloys”, Acta Materialia, 45, 1997, 513-528.
http://www.sciencedirect.com/science/article/pii/S1359645496001917
41. Farhat Z.N., Ding Y., Northwood D.O., Alpas A.T., “Nanoindentation and Friction Studies on Ti-Based Nanolaminated Films”, Surface and Coatings Technology,89, 1997, 24-30.
http://www.sciencedirect.com/science/article/pii/S0257897296029398
40. Farhat Z. N., Ding Y., Alpas A.T., Northwood D.O., “The Processing and Testing of New and Advanced Materials for Wear Resistant Surface Coatings”, Journal of Materials Processing Technology, 63, 1997, 859-864.
http://www.sciencedirect.com/science/article/pii/S0924013696027392
39. Wilson S., Alpas A.T., "Wear Behaviour of Al Matrix Composites at Elevated Temperatures", Sciences de la matiere, 1997, 152-161.
http://cat.inist.fr/?aModele=afficheN&cpsidt=1579386
38. Ding Y., Northwood D.O., Alpas A.T., “Microstructure and Mechanical Properties of Ni-Al Composite Coatings for Tribological Applications”, Surface Engineering, 13, 1997, 31-36.
http://www.maneyonline.com/doi/abs/10.1179/sur.1997.13.1.31
1996
37. Wilson S., Alpas A.T., “Dry Sliding Wear of a PVD TiN Coating against Si3N4 at Elevated Temperatures”, Surface and Coatings Technology, 86-87, 1996, 75-81.
http://www.sciencedirect.com/science/article/pii/S0257897296029635
36. Stephenson T.F., Warner A.E.M., Wilson S., Alpas A.T., Rohatgi P.K., "Aluminum Hybrid Composites Containing Nickel-Coated Graphite Particulate", Properties and Applications of Cast Metal Matrix Composites, 1996, 337-351
35. Singh J., Alpas A.T., “High-temperature Wear and Deformation Processes in Metal Matrix Composites”, Metallurgical and Materials Transactions A, 27, 1996, 3135-3148.
http://link.springer.com/article/10.1007/BF02663864
34. Wilson S., Alpas A.T., “Effect of Temperature on the Sliding Wear Performance of Al Alloys and Al Matrix Composites”, Wear, 196, 1996, 270-278.
http://www.sciencedirect.com/science/article/pii/0043164896069232
33. Farhat Z.N., Alpas A.T., Northwood D.O., "Application of X-Ray Diffraction Techniques to the Understanding of the Dry Sliding Wear Behaviour of Aluminum and Titanium", School of Materials and Mineral Resources Engineering Universiti Sains Malaysia, 1996, 86-91.
http://www.iaea.org/inis/collection/nclcollectionstore/_public/28/053/28...
32. Chen H., Alpas A.T., “Wear of Aluminium Matrix Composites Reinforced with Nickel-Coated Carbon Fibres”, Wear, 192, 1996, 186-198.
http://www.sciencedirect.com/science/article/pii/0043164895067957
31. Farhat Z.N., Ding Y., Northwood D.O., Alpas A.T., “Effect of Grain Size on Friction and Wear of Nanocrystalline Aluminum”, Materials Science and Engineering A, 206, 1996, 302-313.
http://www.sciencedirect.com/science/article/pii/0921509395100164
1995
30. Ding Y., Northwood D.O., Alpas A.T., “The Microstructure and Mechanical Properties of Nanocrystalline Laminated A1/A12O3 Composites Fabricated by Magnetron Sputtering”, Materials Science Forum, 189-190, 1995, 309-314.
http://www.scientific.net/MSF.189-190.309
29. Ding Y., Farhat Z.N., Northwood D.O., Alpas A.T., "Nanoindentation and Friction Studies on TiN and Nanolaminated Ti/TiN Surface Coatings", International Conference on Surface Science and Engineering, 19, 1995.
28. Singh J., Alpas A.T., “Elevated Temperature Wear of A16061 and A16061-20% A12O3”, Scripta Metallurgica et Materialia, 32, 1995, 1099-1105.
http://www.sciencedirect.com/science/article/pii/0956716X94000042
27. Singh J., Alpas A.T., “Dry Sliding Wear Mechanisms in a Ti50Ni47Fe3 Intermetallic Alloy”, Wear, 181-183, 1995, 302-311.
http://www.sciencedirect.com/science/article/pii/0043164895900373
26. Yuquan D., Farhat Z.N., Northwood D.O., Alpas A.T., "Mechanical and Tribological Properties of Nanocyrstalline Laminated A1/A1203 Composites", New Horizons for Materials, 4, 1995, 353.
25. Ames W., Alpas A.T., "Sliding Wear of and Al-Si Alloy Reinforced With Silicon Carbide Particles and Graphite Flakes", Friction and Wear Technology for Advanced Composites Materials, 1995, 27-35.
24. Ames W., Alpas, A.T., “Wear Mechanisms in Hybrid Composites of Graphite-20% SiC in A356 Aluminium Alloy (A1-7% Si-0.3% Mg)”, Metallurgical and Materials Transactions A, 26, 1995, 85-98.
http://link.springer.com/article/10.1007/BF02669796#page-1
1994
23. Ding Y., Farhat Z., Northwood D.O., Alpas A.T., “Mechanical Properties and Tribological Behaviour of Nanolayered A1/A12O3 and Ti/TiN Composites”, Surface and Coatings Technology, 68-69, 1994, 459-467.
http://www.sciencedirect.com/science/article/pii/025789729490202X
22. Alpas A.T., Zhang J., “Effect of Microstructure (Particulate Size and Volume Fraction) and Counterface Material on the Sliding Wear Resistance of Particulate-Reinforced Aluminium Matrix Composites”, Metallurgical Transactions A, 25, 1994, 969-983.
http://link.springer.com/article/10.1007/BF02652272#page-1
21. Singh J., Alpas A.T., "High-Temperature Wear of Al 6061-20% Al2O3", Recent Developments in Light Metals, 1994, 149-160.
1993
20. Ding Y., Northwood D.O., Alpas A.T., “Fabrication of Microlaminated A1/A12O3 Composites by Magnetron Sputtering for Tribological Applications”, Surface and Coatings Technology, 62, 1993, 448-453.
http://www.sciencedirect.com/science/article/pii/025789729390282S
19. Alpas A.T., Hu H., Zhang J., "Plastic Deformation and Damage Accumulation Below the Worn Surfaces", Wear, 162, 1993, 188-195.
http://www.sciencedirect.com/science/article/pii/004316489390500L
18. Zhang J., Alpas A.T., “Wear Regimes and Transitions in Al2O3 Particulate-Reinforced Aluminium Alloys”, Materials Science and Engineering A, 161, 1993, 273-284.
http://www.sciencedirect.com/science/article/pii/092150939390522G
17. Zhang J., Alpas A.T., “Delamination Wear in Ductile Materials Containing Second Phase Particles”, Materials Science and Engineering A, 160, 1993, 25-35.
http://www.sciencedirect.com/science/article/pii/092150939390494Y
16. Alpas A.T., "Metallography of Sliding Wear in SiC Reinforced Aluminum Matrix Composites", Microstructural Science, 19, 1993, 431-431.
15. Ariapour A., Alpas A.T., "Effect of SiC Particles on Age-Hardening and Mechanical Properties of Aluminum Alloys", Dev. Appl. Ceram. New Met. Alloys, 1993, 229-232.
14. Ames W., Alpas A.T., Stephenson T.F., "Sliding Wear of an Aluminum-Silicon Alloy Reinforced With Nickel-Coate Carbon Fibers", Dev. Appl. Ceram. New Met. Alloys, 1993, 259-271.
13. Zhang J., Alpas A.T., "Wear Regimes in Ceramic Particulate Reinforced Aluminum Alloys", Friction, Lubrication and Wear Technology for Advanced Composite Materials, 1993, 65-77.
1992
12. Alpas A.T., Zhang J., “Effect of SiC Particulate Reinforcement on the Dry Sliding Wear of Aluminium-Silicon Alloys (A356)”, Wear, 155, 1992, 83-104.
http://www.sciencedirect.com/science/article/pii/004316489290111K
11. Alpas A.T., Zhang J., “Wear Rate Transitions in Cast Aluminium—Silicon Alloys Reinforced with SiC Particles”, Scripta Metallurgica et Materialia, 26, 1992, 505-509.
http://www.sciencedirect.com/science/article/pii/0956716X9290638U
10. Zhang J., Alpas A.T., "Tribological Behaviour of Al2O3 Perticulate Reinforced 6061 Al Matrix Composites", Advances in Production and Fabrication of Light Metals and Metal Matrix Composites, 1992, 651-663.
1991
9. Alpas A.T., Embury J.D., “The Role of Subsurface Deformation and Strain Localization on the Sliding Wear Behaviour of Laminated Composites”, Wear, 146, 1991, 285-300.
http://www.sciencedirect.com/science/article/pii/0043164891900697
8. Alpas A.T., Embury J.D., "Wear Mechanisms in Particle Reinforced and Laminated Metal Matrix Composites, in: K.C. Ludema, R.G. Bayer", Proceedings of the Conference on Wear of Materials 1991, ASME, 1991, 159-166.
1990
7. Alpas A.T., Edwards L., Reid C.N., “The Effect of R-Ratio on Near Threshold Fatigue Crack Growth in a Metallic Glass and a Stainless Steel”, Engineering Fracture Mechanics, 36, 1990, 77-92.
http://www.sciencedirect.com/science/article/pii/0013794490900982
6. Alpas A.T., Embury J.D., “Sliding and Abrasive Wear Behaviour of an Aluminium (2014)—SiC Particle Reinforced Composite”, Scripta Metallurgica, 24, 1990, 931-935.
http://www.sciencedirect.com/science/article/pii/0956716X9090140C
5. Alpas A.T., Embury J.D., Hardwick D.A., Springer R.W., “The Mechanical Properties of Laminated Microscale Composites of A1/A12O3”, Journal of Materials Science, 25, 1990, 1603-1609.
http://link.springer.com/article/10.1007/BF01045357#page-1
1989
4. Alpas A.T., Edwards L. and Reid C.N., “Fracture and Fatigue Crack Propagation in a Nickel-Base Metallic Glass”, Metallurgical Transactions A, 20, 1989, 1395-1409.
http://link.springer.com/article/10.1007/BF02665497#page-1
1988
3. Alpas A.T. and Embury J.D., “Flow Localization in Thin Layers of Amorphous Alloys in Laminated Composite Structures”, Scripta Metallurgica, 22, 1988, 265-270.
http://www.sciencedirect.com/science/article/pii/S0036974888803466
2. Alpas A.T., Edwards L. and Reid C.N., “Fatigue Crack Propagation in a Ni78Si10B12 Metallic Glass with Amorphous and Partially Crystalline Structures”, Materials Science and Engineering A, 98, 1988, 501-504.
http://www.sciencedirect.com/science/article/pii/0025541688902169
1987
1. Alpas A.T., Edwards L. and Reid C.N., “Shear Crack Propagation in a Nickel Base Metallic Glass”, Acta Metallurgica et Materialia, 35, 1987, 787-796.
http://www.sciencedirect.com/science/article/pii/0001616087902069